Oscillating Traversing Spool Winder Model TS106
Progressive Machine Company's Model TS106 traversing spool winder is designed to wind wide web or strip profiles with an overlapping wind pattern. This machine traverses the frame on linear ways thereby keeping the material in line with the process up to the point of contact on the core or spool. Consequently, camber associated with the normal side to side motion of the guide is eliminated.
The 106 is available in single or dual spindle models depending on process line requirements. This winder is frequently used in applications where traverse winding a flat profile to offset a profile is required (For example; weather stripping, zip closure bags, rubber moldings).
Additionally, the Model 106 can be geared to provide very small pitch. This makes it particularly suitable to product that may be affected by lateral stresses that may result from a traversing guide. It has been successfully used for jacketed fiber, extruded tube, and similar round product.
|Length (Spool Dependent)||72 in 180 cm|
|Material Width with Overlapping Wind||12 in|
|Max. Package O.D.||24 in|
|Max. Package Weight||150 lb|
|Max. Package Width||24 in|
|Max. Winding Speed||300 fpm|
|Rewind Tension, STC||10 to 50 g|
|Rewind Tension, Telesensor||1/2 to 2 lb|
|Traverse Pitch||Adjustable to 2.25 in|
|Width (Spool Dependent)||36 in 90 cm|