Home / Telesensors / Telesensors /

T09 Non-Contact, Ultrasonic Loop Controller (Standalone)

Progressive Machine Company's Telesensor utilizes sonar signals to maintain a free loop between the prime mover and a payoff or winding unit, thus eliminating a major cause of product damage.

The Telesensor provides an ultra-light tension solution for monitoring and controlling loop depth for especially delicate materials which can tolerate minimal, if any contact pressure. The sensor transmits an ultrasonic pulse to a low mass roller or the material itself at the base of the loop and senses the return signal. It then, through an extremely accurate digital signal process, provides linear, proportional control to the motor drive of the winding / payoff unit. As, the loop depth varies, the spindle rpm reacts to maintain the loop within specified limits.

Specifications

Frequency60 Hz
Height - Floor Stand62 in
Height - Table Stand48 in
Output0 to 10 V DC
Phase1
Sensor Head Size12 x 6 x 6 in
Speed Rangeto 1000 fpm
Tension Range with Slide Assemblyfrom 10 g
Tension Range without SlideMaterial weight
Voltage110 V
Weight without Stand5 lb

Benefits

1) External loop controls, no tools necessary.
2) Constant loop monitoring for consistent tension control.
3) Can be used to control winding, unwinding, or other motor driven processes.
4) Proportional output voltage controls most AC or DC

Note

Although Progressive Machine Company offers several standard products, each is infinitely customizable as determined by customer need. Machine specifications are subject to change based on the individual requirements. Progressive Machine Company provides unique, application specific, solutions.